04 Odysey Sliding doors

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74914
Printed Date: May 31, 2024 at 7:27 PM

Topic: 04 Odysey Sliding doors

Posted By: northern
Subject: 04 Odysey Sliding doors
Date Posted: March 22, 2006 at 2:32 PM

Yes, I did a search on this topic, and found the past posts, however what I am trying to do is make it so 1 aux can open both doors, and the same aux can close both doors...

Any ideas how to do this.

If not, how can I wire it so 1 aux opens both doors, and a second aux closes both doors. I tried to play around with some relays but Im not getting the results..

Here is a wiring diagram I got from velocity's post. https://www.the12volt.com/installbay/uploads/Honda_Odyssey_slide_doors.pdf

However Like I said, I want to only use 1 AUX, or 2 at max, not 3.

I am doing this with a AS2520TW from autostart.

Replies:

Posted By: BNLUIS
Date Posted: March 22, 2006 at 4:02 PM

I am not familiar with those units but a quick search reveal is a two way system? let me know if it has a domelight supervision output if so the I have A fix for you it will require 1 more relay and followwing the diagram you posted.

-------------
Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.

Posted By: northern
Date Posted: March 23, 2006 at 8:15 PM

I don't belive there is a domelight supervision output.. Its a 2 way model made from autostart.

Posted By: mo12v
Date Posted: March 23, 2006 at 9:27 PM

Try:

https://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1085.pdf

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: thepencil
Date Posted: March 24, 2006 at 8:42 AM

2005_odyssey_sliding_doors_-_autostart.pdf

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: northern
Date Posted: March 25, 2006 at 4:21 PM

Any way to do this with out a 611T Directed Part.

Pencil, that diagram, shows you how to do it with 3 different AUX outputs. I want to use 1 maybe 2 at most....