Print Page | Close Window

clifford rsx 3.5 remote programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74952
Printed Date: May 28, 2024 at 1:41 PM


Topic: clifford rsx 3.5 remote programming

Posted By: screamdj
Subject: clifford rsx 3.5 remote programming
Date Posted: March 23, 2006 at 6:48 AM

Could someone tell me how to program a new remote to clifford rsx 3.5?

Many thanks

Hitesh Meghani



-------------
Great minds think alike



Replies:

Posted By: kgerry
Date Posted: March 23, 2006 at 8:14 AM
open  the drivers door, put the key in and turn it to ign, press the programming switch once, then press it again and hold it in... the LED should flash once... then press the lock button once, then a second time to confirm... and presto you just auto-learned a new remote.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979



Posted By: screamdj
Date Posted: March 23, 2006 at 9:07 AM
the led does not flash, its stays on is this right?

-------------
Great minds think alike



Posted By: screamdj
Date Posted: March 23, 2006 at 7:50 PM
it stays on when pressed once, the once more and hold? but this is only when the car is running? in ign mode it seems to do nothing?

-------------
Great minds think alike


Print Page | Close Window