Rattler model 300 in mercedes?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74978
Printed Date: May 04, 2024 at 1:54 PM

Topic: Rattler model 300 in mercedes?

Posted By: advancedautotek
Subject: Rattler model 300 in mercedes?
Date Posted: March 23, 2006 at 2:38 PM

Any one here that can help me? I am installing a rattler alarm model into a 85 Mercedes Benz 190e and cant seem to figure out how to connect my triggers to the vacuum lock actuators, any information diagrams etc. would be very helpful Thanks in advance.

michaelleeadvanced@hotmail.com

Replies:

Posted By: xscash
Date Posted: March 23, 2006 at 2:57 PM

here is what i have XS Doorlocks/Windows
	WIRE	COLOR	POLARITY	LOCATION
	Power Unlock	GREEN OR BLUE	(VAC)	VACUUM DOOR LOCK SYSTEM "SEE TECH TIPS"
		REQUIRES THREE SECOND LOCK PULSE
	PowerLock	GREEN OR BLUE	(VAC)	DRIVER'S KICK OR PUMP UNDER REAR SEAT
		REQUIRES THREE SECOND LOCK PULSE
	LF Window Up	RF:BLACK
	RF Window Up	LF:BLACK/ WHITE LR:BLACK/ PINK RR:BLUE/EHT
	LR Window Up	RF:GREEN
	RR Window Up	LF:GREEN/ YELLOW LR:GREEN/ BLACK RR:GREEN/ RED

Posted By: advancedautotek
Date Posted: March 23, 2006 at 2:59 PM

To be more specific I am attempting to get the alarm connected to the auto door locks, It is a 3 wire door lock actuator, 1 brown(-) 1 red(+)

1 green switches (-)/(+) depending on if door lock button is up or down, If I run the - trigger wire from alarm to the green or the + trigger wire to it, it will blow a fuse as the wire is still switched at the actuator itself, is there a separate unit I have to buy to get keyless entry working? Or do you know if there is a way to run relays in some sort of series to allow the alarm to operate auto door locks? This is my first run into mercedes benz vacuum locks.

Thanks in advance, Mike

Posted By: xscash
Date Posted: March 23, 2006 at 3:01 PM

https://documents.audiovox.com/700060.pdf here is te diag.

Posted By: advancedautotek
Date Posted: March 23, 2006 at 3:09 PM

Thx a million!!