Print Page | Close Window

Add on kill relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75016
Printed Date: May 28, 2024 at 10:56 PM


Topic: Add on kill relay

Posted By: sunnyboy368
Subject: Add on kill relay
Date Posted: March 24, 2006 at 4:50 AM

Hello,

I have just installed by alarm , immobilser and it works really well.

The alarm has one yellow wire which feeds to an ignition kill relay. Is it possible to add on another kill relay using the same yellow wire? i woudl liek to have two circuit immobilsation liek the cat 1 alarms.

many thanks

Sunnyboy368



-------------
EZ
Sunnyboy368



Replies:

Posted By: xscash
Date Posted: March 24, 2006 at 7:28 AM
yes...just diode isolate the conection...and make sure the yellow wire is outputing more than 160ma, since each relay requires 80ma.


Print Page | Close Window