doorlock diode isolation

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75060
Printed Date: May 06, 2025 at 3:24 AM

Topic: doorlock diode isolation

Posted By: rnemtb
Subject: doorlock diode isolation
Date Posted: March 25, 2006 at 7:47 AM

hi everyone,

can someone provide a link for the direct fax #1076 ? i am installing a remote start on a 2001 ford explorer with (-) polority door locks. any help is appreciated . i have tried dirct techs site but unable to access. iam not working for an installation company yet.

thanks

george

-------------
rnemtb

Replies:

Posted By: Velocity Motors
Date Posted: March 25, 2006 at 7:56 AM

If your installating just a remote start you do not need to diode isolate the doors. If your installing an alarm system, then you will need to use diagram A:

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: rnemtb
Date Posted: March 25, 2006 at 1:47 PM

thank s for the help jeff.

george

-------------
rnemtb