prestige aps 997 transmitter programming

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75151
Printed Date: September 11, 2025 at 3:29 AM

Topic: prestige aps 997 transmitter programming

Posted By: razafina
Subject: prestige aps 997 transmitter programming
Date Posted: March 26, 2006 at 9:04 PM

Hi everybody ,I installed my prestige aps 997 everything works except I cannot find any where in the manuals what buttons or combinations of buttons to push to use channels # 4 thru #7,channnel # 3 is clearly stated to be the trunk released,but thats is as far as it goes in the installation manual.

The user manuals just says to mark down the combination of buttons to operate each additional channel and that is it.

I hope somebody in the forum has the knowledge and is familiar with the audiovox pretige lines.

Thanks for Your time. :errr:

Replies:

Posted By: doibuy
Date Posted: March 26, 2006 at 9:11 PM

Channel four is your option button. As for the rest I've never seen it in the manual either, but you can program them to which ever button combination you would like. Turn on ignition, press the valet 3 times, horn honks once, press lock, press valet-horn honks twice press unlock, press valet-horn honks three times press key button, press valet-horn honks four times press option, press valet-horn honks five times, press combination of buttons for channel five, and so on for channel 6 and 7.

Posted By: bdl666
Date Posted: March 27, 2006 at 4:14 AM

You have to program channels 4 through 7. Just follow doibuy instructions. Also remember to do it for both remotes.

Posted By: razafina
Date Posted: March 27, 2006 at 6:16 AM

I can thank this forum enough for the quality people and quick responses,thanks guys, I will do just as you guys say and I am sure it will definitely work.

Thanks again for your quick responses. posted_image

Posted By: john ogrady
Date Posted: March 27, 2006 at 8:09 PM

Most Alarms or remote car starters are either 3 or 4 channels .Your keychain transmitter can handle up to 7 channels.These extra channels on your transmitters can be used to control another vehicle.For example you have another member of your family with a Audiovox remote starter in their vehicle.You can program the extra channels on your transmitter to work the other vehicles remote car starter.