cruise failure after 2w900fm-s

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75264
Printed Date: May 20, 2025 at 10:08 AM

Topic: cruise failure after 2w900fm-s

Posted By: akguy
Subject: cruise failure after 2w900fm-s
Date Posted: March 28, 2006 at 3:46 PM

Thank you guys, with the help of this forum I was able to install my own starter, having fun while doing it but now I'm having a problem with the cruise control not working.
like this topic https://www.the12volt.com/installbay/forum_posts.asp?tid=69379&KW=cruise+not+working I'm having the same problem... checked everything, disconnected the wire from the brake switch (to starter module) and still no success.. Anybody has any suggestions?

Thank you

Replies:

Posted By: akguy
Date Posted: March 28, 2006 at 3:49 PM

Oops... don't know how to edit my own post but I forgot to mention the make of my truck:

2001 Silverado (everything electric)

Posted By: mo12v
Date Posted: March 28, 2006 at 7:27 PM

Check Cruise Control Fuse @ Driver side Fuse Box
Be sure your Brake Lights work.......
Make sure you did not unplug the 4 Prong Plug on side of Steering Column.....
If you Unpluged Ignition 52 PIN Plug under Steering Column, check to be sure it is tight & NO PINS bent.......
Check your White Wire on Brake Switch, should show Ground when Pedal Up, 12Volts + when Pedal pushed.......
Check Orange wire on Brake Switch, should show 12 Volts + Constant.......
Also Check Plug on Driver Firewall under hood.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: akguy
Date Posted: April 07, 2006 at 1:30 AM

After "dropping" the whole thing for a while as it drove me crazy I got back to it.... checked every single plug and wires and what do you know it all started working :)

Funny I had checked the plugs and wires before without luck.. anyway thanks it is working now.