Print Page | Close Window

2002 Dodge Dakota, Alarm, Lock/Unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75281
Printed Date: June 15, 2024 at 1:30 PM


Topic: 2002 Dodge Dakota, Alarm, Lock/Unlock

Posted By: cmeace
Subject: 2002 Dodge Dakota, Alarm, Lock/Unlock
Date Posted: March 28, 2006 at 9:20 PM

I'm looking for a little professional advice on the door lock/unlock hook-up on a 2002 Dodge Dakota truck.  I have taken a look at the wiring info on this site.  The info that is given here is a single wire system, white green wire.  I have found this wire and verified it is the correct one.  I have obtained the proper resistors and attempted hook-up.  I can get the doors to lock with no problem by hooking up the lock wire only.  But, when connecting the unlock wire, the doors will lock on disarm and not unlock at all.  Anyone have this problem?  I'm sure it is probably something simple, but beyond the scope of my knowledge.  I would appreciate any suggestions.  Thanks in advance.  The alarm that I'm using is a Code CA-670 Elite if that makes any difference.



Replies:

Posted By: redpeppers
Date Posted: March 28, 2006 at 11:00 PM

Lock is negative trigger thru a 820 ohm resistor. Unlock is negative trigger thru a 330 ohm resistor. MUST use relays.

sounds like you have the lock and unlock wires wired up wrong.



-------------
Where theres is a wire there's a way.


Print Page | Close Window