06 Envoy alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75294
Printed Date: May 19, 2025 at 5:54 AM

Topic: 06 Envoy alarm/remote start

Posted By: xtac1080
Subject: 06 Envoy alarm/remote start
Date Posted: March 29, 2006 at 1:03 AM

I will be dropping a DEI R/S & Alarm into a 2006 GMC Envoy this coming Saturday and I was wondering if anyone had any experience under the dash of one of these. I have worked on an 03 and 04 before, but I did not see a stat sheet on it on this site. Are the colors the same? Will the 455G still operate the doors through databus? Any feedback is much much MUCH appreciated!

Thanks!
Nick

Replies:

Posted By: Hornshockey
Date Posted: March 29, 2006 at 1:17 AM

As far as I can see, there have been no changes to the Envoy for 06. The wiring info you have for 04 should be identical.

And you'll need the 457GW to operate the doorlocks. I'm assuming that's what you meant, since that is the same interface used on the 03/04.

-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.

Posted By: Twelvoltz
Date Posted: March 29, 2006 at 6:56 AM

As Hornshockey has already stated you want the 457GW or equivalent competitors model, the wiring diagram looks the same. You can find the diagram here.

Posted By: 05gt
Date Posted: March 29, 2006 at 12:38 PM

i did one three days ago, I used the GM-SL data inteface module for doorlocks and everything else, worked great

Posted By: xtac1080
Date Posted: April 01, 2006 at 1:03 PM

Thanks a lot you guys!

Print Page | Close Window