clifford intellistart 4 with gm keyless?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75389
Printed Date: May 16, 2025 at 7:34 PM

Topic: clifford intellistart 4 with gm keyless?

Posted By: jdcamaro
Subject: clifford intellistart 4 with gm keyless?
Date Posted: March 30, 2006 at 1:44 PM

can you use a clifford intellistart 4 with a gm keyless entry and if so how do you wire it in?

Replies:

Posted By: Powermyster
Date Posted: March 30, 2006 at 4:51 PM

if you mean the gm remote to activate the intelli start. then no it can't be done

-------------
Why oh Why didn't i take the blue pill
Darren Power

Posted By: dxdenis02
Date Posted: April 01, 2006 at 1:35 PM

i disagree powermyster but you need to add a dei hornet 727t addon alarm and the 727t will give you the ch2 needed for the remote start and it will work with the factory gm keyless entry goodluck

Posted By: Powermyster
Date Posted: April 03, 2006 at 3:05 AM

the intellistart is activated through the wizard port and the wizzard port is a multiplex communication channel so i can't see a way to do it

-------------
Why oh Why didn't i take the blue pill
Darren Power

Posted By: Big Dog
Date Posted: April 03, 2006 at 9:53 AM

The Powermyster is right!

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: sonideroditron
Date Posted: April 03, 2006 at 10:35 PM

they don't know about the data port and they think you can activate it like any other engine start module

Posted By: Big Dog
Date Posted: April 04, 2006 at 8:48 AM

Sorry. No Can Do! posted_image

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Print Page | Close Window