98 camaro firebird factory led
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75451
Printed Date: November 04, 2025 at 5:41 AM
Topic: 98 camaro firebird factory led
Posted By: dxdenis02
Subject: 98 camaro firebird factory led
Date Posted: March 31, 2006 at 12:45 PM
does anyone know where i can tap into the factory top dash mounted led and what are its voltage requirements. i would like to use this led instead of the standard alarm led which is 3v DC
Replies:
Posted By: dxdenis02
Date Posted: March 31, 2006 at 3:39 PM
stike that the clifford outputs a 12v dc still need specs and color for factory led
Posted By: auex
Date Posted: March 31, 2006 at 5:23 PM
The output on the alarm is actually on the - side of the output. If it is new then it should be 2V
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
Posted By: dxdenis02
Date Posted: March 31, 2006 at 7:59 PM
yes you are correct but let me add more info. i dug into the crates
and on the clifford intelliguard 8000 violet is the +12v that drives
the led. also the factory led on the trans am is c16 dark green at the
bcm passenger under dash now anyone know the voltage to drive this
led or am i going to have to bend down and measure it lol
|