89 honda prelude door pins

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75496
Printed Date: July 13, 2025 at 11:19 PM

Topic: 89 honda prelude door pins

Posted By: ashed
Subject: 89 honda prelude door pins
Date Posted: April 01, 2006 at 10:03 AM

Door pis left to right 1 lead. Works fine until you open the door. Then they start to smoke & the fuse blows. The alarm is the python with starter kill.

Replies:

Posted By: ashed
Date Posted: April 01, 2006 at 12:56 PM

the alarm is the Phthon 1000. looked for the manual here but not 1 .

Posted By: KarTuneMan
Date Posted: April 02, 2006 at 12:49 PM

WELL....the door triggers on this car are NEG(-) are you sure you have the correct wire from the alarm? Sounds to me like the wire you used has 12 volts on it? It should NOT. Get your meter out and test it. There should be NO fuse on the door trigger input wire from the alarm.

https://www.directeddealers.com/manuals/ig/python/N439P.pdf heres a link for a 1000ESP

-------------

Posted By: ashed
Date Posted: April 02, 2006 at 4:09 PM

thanks. BUT its all good now. Ive been working on it all morning and I have it worked out.. thanks for the tip...

Print Page | Close Window