Clifford Virtual Key manual

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75503
Printed Date: July 18, 2025 at 1:32 AM

Topic: Clifford Virtual Key manual

Posted By: quadra
Subject: Clifford Virtual Key manual
Date Posted: April 01, 2006 at 2:04 PM

Does anyone know where I can get an installation manual for this immobiliser. I took it out of my last car about 2 years ago and I labelled the wires at the same time. Only thing is, that i seem to be missing something somewhere. I think I need another 12v input other than just the black wire with the fuse (all the wires are black by the way). I seem to remember that the unit needs an ignition feed as well is this right. I currently have the following wires connected.

12v+ power - wire with fuse

3 earth wires including one for the led

12v+ led wire to led

I have identifeid which wire pairs are the relay wires and that one of the othre wires needs to be earthed when the door is opened.

But I'm not sure about the other two.

Does this make sense?

Cheers Mike

Replies:

Posted By: Big Dog
Date Posted: April 03, 2006 at 10:36 AM

Mike, PM me and I'll e-mail the install guide in PDF format.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: Big Dog
Date Posted: April 03, 2006 at 12:16 PM

I've uploaded it to the "Downloads" page on this site.

-------------
Prepare your future. It wasn't the lack of stones that killed the stone age.

Posted By: quadra
Date Posted: April 03, 2006 at 1:46 PM

I cannot thank you enough, this will save me a lot of time and head scratching.

Thank you again

Cheers Mike