PK2 lock out
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75567
Printed Date: May 11, 2025 at 8:55 PM
Topic: PK2 lock out
Posted By: mxxmikexx
Subject: PK2 lock out
Date Posted: April 02, 2006 at 2:54 PM
I have a buddy who just called me and he just got done replacing the turn signal stalk on his s-10 and during the process he somehow tripped the PK2 security and now the truck wont run. will disconnecting the battery and letting it sit for 20-30 cure the problem? I've worked on tons of Gm's and never tripped it like that, so im not sure how to remedy the problem. The only thing he did during the installation was unbolt that large square junction block under the dash, so he's not sure if perhaps the ignition was on when he unplugged that connector so maybe thats what tripped the passlock? any advice would be great.
Replies:
Posted By: tragik
Date Posted: April 02, 2006 at 3:11 PM
Unplugging the battery wont do anything. To reset PK2 just put the key in the ignition and turn it on for 15 minute. As soon as the security lamp stops flashing it should be good to go.
-------------
Northstart.....or start it your damn self.
|