Print Page | Close Window

H1/3 White/Blue Viper 791xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75597
Printed Date: June 08, 2024 at 9:40 AM


Topic: H1/3 White/Blue Viper 791xv

Posted By: t0mmyr
Subject: H1/3 White/Blue Viper 791xv
Date Posted: April 03, 2006 at 2:34 AM

H1/3 WHITE/ BLUE remote start (-) activation input

what do i hook this up to in my remote start automatica 2001 maxima? 

does it have to be connect for remote start to work from my remote??




Replies:

Posted By: Twelvoltz
Date Posted: April 03, 2006 at 6:27 AM
The H1/3 WHITE/ BLUE remote start (-) activation input is a wire that the Viper monitors for a ground pulse. If that wire recieves a ground the Viper will start your car, the same as if you had activated it via the remote control, it can be programmed to turn on with either one or two pulses. This is not a mandatory connection.



Posted By: 05impalaman
Date Posted: April 03, 2006 at 1:22 PM
In other words, you can connect this through a switch to ground if you want to hide a button somewhere that will "remote start" the car.  It works just like the remote, as Twelvotz said.  This can be handy if a friend has to wait in the car and wants to warm it up.  Otherwise, tape it back and forget about it. 

-------------
There are 10 kinds of people in the world... those that understand binary, and those that don't.


Print Page | Close Window