alarm lock and unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75678
Printed Date: May 14, 2025 at 1:21 AM

Topic: alarm lock and unlock

Posted By: elchapin
Subject: alarm lock and unlock
Date Posted: April 04, 2006 at 3:44 PM

I was wondering if anyone can help I am having troublw with my alarm it will no longer lock and unlock my power locks. I checked my power locks and they are fine I wanted to know if there was a way on checking the alarm outputs for lock and unlock. Also would there be a way for me to make it lock and unlock if the outputs are burned out. Last question this is for another car I wanted to know if there was a way to make my windows roll down with the unlock feature and roll up with the lock feature?

-------------
ERH

Replies:

Posted By: mo12v
Date Posted: April 04, 2006 at 4:20 PM

Not knowing more info
Year, Make & Model
Brand & Model of Alarm

makes it difficult to give good answers.

You can check the Output of your Alarm with a Meter.
Check the workings of the Door Lock Wiring needs more Info. They could be 12 Volt + , - 5 Wire reversal, Resistor, etc.

On your Windows:
There are a varity of Modules available to accomplish this.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: elchapin
Date Posted: April 04, 2006 at 4:24 PM

well the alarm says postive lock negative lock that is why I assumed it would easier to just state the question like that.

-------------
ERH

Posted By: mo12v
Date Posted: April 04, 2006 at 4:29 PM

A lot of Units have that ability.
You probably need give the Brand & Model

Also car it is installed into

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.