Viper 791vx - disable remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75742
Printed Date: May 15, 2025 at 11:34 AM

Topic: Viper 791vx - disable remote start

Posted By: slayant
Subject: Viper 791vx - disable remote start
Date Posted: April 05, 2006 at 2:44 PM

Couldn't find a Viper 5000 system so here goes...

I want to install the Viper 791VX into my 1997 Honda Civic 5sp, but do NOT want the remote start. Will the rest of the alarm be functional without the remote start wired up? Thanks.

Replies:

Posted By: Twelvoltz
Date Posted: April 05, 2006 at 5:17 PM

Hooking up a non-manual transmission remote start capable unit is not legal in a manual transmission.

Do not hook up the BLACK/ White wire in H3. This is the neutral safety input, if this wire does not see ground the system will not start.

Posted By: profuse007
Date Posted: April 06, 2006 at 12:02 AM

just dont use the relay pack (XCRS 500m) but use the ribbon that contained the yellow wire. tap this line to an ignition. this wire is used for programming and other features for alarm.

use a single relay for starter-kill, then use the orange wire from primary harness to trigger the kill.

slayant wrote:

Couldn't find a Viper 5000 system so here goes...

I want to install the Viper 791VX into my 1997 Honda Civic 5sp, but do NOT want the remote start. Will the rest of the alarm be functional without the remote start wired up? Thanks.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).