Viper 791xv Main Harness Orange Wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75820
Printed Date: July 16, 2025 at 8:47 AM
Topic: Viper 791xv Main Harness Orange Wire
Posted By: t0mmyr
Subject: Viper 791xv Main Harness Orange Wire
Date Posted: April 06, 2006 at 11:28 PM
hello, I installed my viper into my maxima last weekend, I didn't know if I needed to connect my ORANGE wire from H1 to anything, it was attached a relay I cut off because I don't think I needed that earlier. I installed the remote start external super relay box, do I need to connect the orange wire to something and do I need that single relay for something?
Replies:
Posted By: Hornshockey
Date Posted: April 06, 2006 at 11:49 PM
the orange wire in the H1 harness is your ground when armed output. It is most commonly used to activate a window rollup module, LED, or starter kill relay.
It can also be used to trigger a relay which can be used for anything your mind can imagine that you'd like active while the alarm is armed. If you do not have anything like this, then you will not need this wire to be connected to anything
-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.
|