panic button for window automation?

I have a Hornet 727t alarm which I'm adding to my keyless entry remote, I'm also planning on adding the window automation module and was wondering if it was possible to use the panic button as an auxiliary channel since my keyless entry remote only has a lock,unlock rear window roll down button and the panic button(which I care less for). Has anyone done this before as I'm thinking it might not be possible cause the panic button puts out intermittent honks?

There isn't a wire on your alarm that is a "panic" wire, so to my knowledge this wouldn't work.  The windows will roll up when you arm the system, the only reason for hooking up the aux channel is to vent/roll them down.

When I lock the doors, the windows will roll up, i just need to use the panic as an auxiliary cause I'm using stock remote. I figure I'm going to have to use about three relays, one relay wired to the ignition so the windows can only be vented when the ignitions off, another relay I'm guessing is for a pulse to steady output to put out a constant output to the horn wire(which will be bypassed to vent/roll windows), then theres the third relay which is to convert the + output to - input(window modules aux input is (-). Now I'll just have to tie them all together and test if it works.