Crimestopper stopped working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7593
Printed Date: June 02, 2024 at 6:11 PM

Topic: Crimestopper stopped working

Posted By: brianh
Subject: Crimestopper stopped working
Date Posted: January 03, 2003 at 11:38 AM

I installed this unit before Christmas on my dads Explorer. It worked fine up until yesterday. It just stopped working. I just pulled it out to check everything and it all seems fine. The fuses,all the connectors are hooked up any ideas? I did attach the OEM disarm wire to the wrong disarm wire in the vehicle. Would that of caused this? i carefully opened the unit up(to look for any burned circuits)but I couldnt see or smell any. By the way the LED was constantly blinking before I disasembled the unit. Thanks in advance. Brian

Replies:

Posted By: brianh
Date Posted: January 03, 2003 at 7:31 PM

Smeone told me to unplug it for 15 minutes and then try it again. Idid that and nothing has changed. Any suggestions? Brian

Posted By: Ohmz
Date Posted: January 03, 2003 at 7:49 PM

do the lights on the dash light up when trying to remote start the vehicle?

Posted By: brianh
Date Posted: January 04, 2003 at 4:15 AM

No they dont. The only thing it will do is go in and out of valet mode. Brian