Print Page | Close Window

791xv program from Voltage to Tach RS

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75953
Printed Date: May 20, 2024 at 9:36 AM


Topic: 791xv program from Voltage to Tach RS

Posted By: t0mmyr
Subject: 791xv program from Voltage to Tach RS
Date Posted: April 09, 2006 at 3:00 PM

I had my viper programmed to remote start by reading the electrical voltage of my car or something like that before in my old car because I couldnt find the tach wire in that car, anyway i removed the alarm and sold that car, I know have it installed in my new car which has a good tach wire.... wouldn't it be better to reset that setting so it starts safely with my tach wire instead of by voltage??? i may be wrong about the voltage part but its a setting similar to this, how do i program this setting?



Replies:

Posted By: swamprat323
Date Posted: April 09, 2006 at 3:16 PM
the install guide for the 791 is is the download section on this site, it tell how to program it


Print Page | Close Window