audiovox aps 995a

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76048
Printed Date: July 25, 2025 at 10:21 AM

Topic: audiovox aps 995a

Posted By: lows10bpazer
Subject: audiovox aps 995a
Date Posted: April 11, 2006 at 2:11 AM

hi i just bought a used audiovox aps 995a lcd remote start alarm i was wondering if n e one had a wiring digram on how to install this item? i am very good with electrical but i havent done a alarm before. the truck is a 1996 jimmy 2dr 2wd

Replies:

Posted By: masterk
Date Posted: April 11, 2006 at 7:34 AM

go to audiovox web site you can get both installation and owners manual

-------------
8d
crawford7827@bellsouth.net

Posted By: lows10bpazer
Date Posted: April 11, 2006 at 3:00 PM

i did that but there install manual is pretty doodiety just wondering if there is any major things i will have to overcome ?

Posted By: Twelvoltz
Date Posted: April 12, 2006 at 8:28 AM

Your '96 Jimmy requires nothing extraordinary for alarm or remote start. The '96 does not require any type of bypass module, nor databus interface. Just match the APS995a's wiring with what is required for your truck. Like the DEI pieces, your unit provides an alternating positive and negative trigger to activate factory doorlock relays so you will not need additional relays for them. You will need only one spare relay to activate the hatch release and one relay for starter kill if you chose to install these options.

Hope this helps.

Keep us posted.