05 Colbolt Disarm Wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76159
Printed Date: May 29, 2024 at 4:35 AM
Topic: 05 Colbolt Disarm Wire
Posted By: newinstaller
Subject: 05 Colbolt Disarm Wire
Date Posted: April 12, 2006 at 11:25 PM
Hi, Any info on the 05 Colbolt Disarm Wire? Everything else is done Thanks
Replies:
Posted By: dea,can
Date Posted: April 13, 2006 at 12:27 AM
Arm/Disarm factory remote only
-------------
dragon
Posted By: Chris Luongo
Date Posted: April 13, 2006 at 8:38 AM
dea,can is correct.
--The only way to arm the factory alarm is to lock the doors using the factory remote.
--The only TWO ways to disarm the alarm are to:
A. Unlock the doors with the factory remote, or
B. Turn on the ignition.
Posted By: sparkie
Date Posted: April 13, 2006 at 5:17 PM
Bypasskit.com will soon have a module out that will control the locks and factory alarm on these cars. Until then you have to use the factory remote to arm and disarm. If you can't wait, there are modules designed to wire directly into the factory remote and trigger it's lock and unlock buttons as well as provide it with a 3 volt power source.
-------------
sparky
Posted By: newinstaller
Date Posted: April 17, 2006 at 11:45 AM
What about using the Compustar feature
Unlock before start lock after start?
Would that work?
Thanks
Posted By: xtremej
Date Posted: April 17, 2006 at 12:10 PM
My memory is pretty bad but I think that it will. I installed an Ultra start and it to has that feature. I'm about 90% sure it worked on the last cobalt we did. -------------
Posted By: sparkie
Date Posted: April 17, 2006 at 8:26 PM
No it won't work. The only way to disarm the factory alarm is to use the factory remote first or start the car. Unfortunately, starting the car usually causes the horn to honk once first before it disarms and may set a service theft system light on the dash. Activating the locks only unlocks the car and does nothing to the alarm. The factory alarm will arm if you use the factory remote to lock the doors. On some Cobalts and Pursuits you can program the car to auto arm or if you relock the doors with a remote starter after they are already locked the alarm will arm. This is why the new module is needed. The company that makes Astrostart may also have a module out that interfaces with the factory alarm on these cars.
-------------
sparky
Posted By: xtremej
Date Posted: April 18, 2006 at 7:59 AM
I ran out of time yesterday, I talked to installler that was working with me and he told me no, we tried it, it didn't work . Sorry I was unable to post this last night  . -------------
|