Relay 12v source
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76218
Printed Date: July 15, 2025 at 2:52 PM
Topic: Relay 12v source
Posted By: mrcllusb
Subject: Relay 12v source
Date Posted: April 14, 2006 at 4:31 AM
I have a 98 dodge intrepid that has 2-12v sources.A red wire(20amps)and pink/black(40amps).I have 4 relays for my clifford alarm.1-lock relay,2-unlock relay,3-parking light relay,and 4-trunk release relay.Can i take 12v for these 4-relays from just the red wire?The reason why i ask is i also have the clifford intellistart4,and i was thinking of using the pink/black(40amps)to just power it..Also,since i'm using a relay for the trunk release,do i still need to install a 1amp diode inline on the wire from 30 to the trunk release wire on my intrepid? The manual says i need to install this diode because i have a trunk ajar indicator on my dash.
-------------
"ole blake"
Replies:
Posted By: Powermyster
Date Posted: April 14, 2006 at 4:36 AM
you should be able to.. as all will not be going together.. are these two wires ign wires..
if so split the 2 power wires for the intelistart to each one..
why have you a parking light relay.. what the clifford has one built in
-------------
Why oh Why didn't i take the blue pill
Darren Power
Posted By: mrcllusb
Date Posted: April 14, 2006 at 4:43 AM
Ahh you know what Powermyster,your right i didn't even notice it.Do i need to install a resistor or anything inline for the parking lights or do i just connect it directly to my parking light wire? And yes they are my ignition wires..
-------------
"ole blake"
Posted By: Powermyster
Date Posted: April 14, 2006 at 2:57 PM
power the relays off the 40A wire..
connect the 2 white wires to a single parking light wire or wire them seperately for split parking light system
-------------
Why oh Why didn't i take the blue pill
Darren Power
Posted By: mrcllusb
Date Posted: May 10, 2006 at 4:23 AM
What size inline fuses do i need for the relays?
-------------
"ole blake"
Posted By: mrcllusb
Date Posted: May 11, 2006 at 5:13 AM
I found the answer..
-------------
"ole blake"
|