Omega Exec 3000atv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76311
Printed Date: May 16, 2025 at 1:09 AM

Topic: Omega Exec 3000atv

Posted By: aaronpudlis
Subject: Omega Exec 3000atv
Date Posted: April 16, 2006 at 11:06 AM

I threw an old Exec 3000atv in my dad's 98 Silverado last week, and everything was working fine, except passive arming/rearming was on, and I didn't want it. I tried to enter programming mode with no luck and now neither of the transmitters work. Any ideas?

Replies:

Posted By: Twelvoltz
Date Posted: April 16, 2006 at 11:13 AM

It sounds as if you have erased the transmitters from the unit's memory. Is there a spot in the manual that tells you how to program the transmitters to the brain? I would try that first.

Keep us posted.

Posted By: draasch
Date Posted: April 17, 2006 at 8:36 AM

send me your e-mail address and i'll send you the info on the programming for the transmitters.....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: aaronpudlis
Date Posted: April 17, 2006 at 7:08 PM

I have the manual, but the programming doesn't work the way it's supposed to. When entering programming mode, the horn is supposed to honk, then it's supposed to honk again every time a remote is progrmamed. I did get both remotes working, but I am still unable to change any of the features, and if I try it the way they say, it only saves the last remote I use. I think there may be a problem with the brain.

Print Page | Close Window