95 nissan pathfinder remote power windows

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76345
Printed Date: May 08, 2025 at 9:04 PM

Topic: 95 nissan pathfinder remote power windows

Posted By: dspoppa
Subject: 95 nissan pathfinder remote power windows
Date Posted: April 17, 2006 at 12:16 AM

I have a 95 nissan pathfinder with power windows (4) and I would like to setup the windows to all go both down and up at the same time (all up at once or all down at once). I have a Scytech RS-500 something, 2 way remote start,alarm. What modules do I need? I was told by the guy who installed my alarm that directed made a module that can do 2 windows up and down and that I would just have 2 of them. Also where would I tap into the truck? at the drivers kick panel? Any help you guys can give me would be great, I'm slowly learning alarms, I even bought this sites alarm wiring CD, but it doesn't have the wire colors for the windows on it,and where they are. so if you could help me with that that would be great to. again thanks alot for your help and info. DJ

Replies:

Posted By: Twelvoltz
Date Posted: April 17, 2006 at 7:10 AM

DEI lists your window information as the following:

LF Window up/dn      blu/blk - blu/red       type A       either kick panel
RF Window up/dn      blu/yel - blu/wht       type A       either kick panel
LR Window up/dn      RED / blk - grn/wht       type A       drivers kick panel
RR Window up/dn      wht/blk - blk/wht       type A       drivers kick panel

They also mention in a note: "NISSAN, PATHFINDER, 1995, LF Window up/dn

The drivers window wiring runs out of the door to the *power window amp* in the passenger kick panel."

I like the DEI 530T for the window control module, but there are other brands/makes/models that may work as well. As you have already mentioned, you would need two of these modules to do all 4 windows.

Hope this helps

Keep us posted

Posted By: dspoppa
Date Posted: April 18, 2006 at 9:14 PM

So does that mean I should tap into before or after the window amp? and do all the windows go through the amp or just the drivers door?