How to connect 508D to 791xv
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76389
Printed Date: May 14, 2024 at 11:29 PM
Topic: How to connect 508D to 791xv
Posted By: COVETTE03
Subject: How to connect 508D to 791xv
Date Posted: April 17, 2006 at 7:59 PM
I just got in my 508D and now I want to connect it to the viper 791xv. I'm pretty sure I know how to connect it. thw red goes the 12v+ constant , the black goes to alarm ground, now how excatly do I hook up the rest. Do I connect it to the blue wire on the shock sensor. Can anyone help me with this install?
Replies:
Posted By: pss5075104
Date Posted: April 17, 2006 at 8:49 PM
just solder the blue, and green wires together as well but make sure that you diode isolate each.
-------------
D
MECP First Class Certified Installer.
Nothing is impossable, it's just more expensive.
Posted By: COVETTE03
Date Posted: April 17, 2006 at 9:35 PM
so diode isolate each one of them to the blue wire of the shock sensor harness,4 pin connector then right? are those wires the major trigger and minor trigger wires? Can I just connect the major only so I don't have to diode isolate? And which one is which?
Posted By: COVETTE03
Date Posted: April 17, 2006 at 9:36 PM
Also is there a diagram anywhere for this install?
|