Code Alarm TW1
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76522
Printed Date: July 04, 2025 at 10:17 AM
Topic: Code Alarm TW1
Posted By: lj808
Subject: Code Alarm TW1
Date Posted: April 20, 2006 at 2:30 PM
I have a TW1 installed on a 04 Concorde. The remote start just quit working one day. It doesn't power up or anything. There was no hood pin installed, not programmed to tach, and no valet on/off switch. I did manage to find a programming button for it. It shows a LED message of 5 flashes. The manual does not help at all. Anybody have any ideas?
-------------
LJ808
Replies:
Posted By: auex
Date Posted: April 21, 2006 at 10:51 PM
Check the fuses for the remote start relays. There should be one fuse for the alarm's main power, one on the parking light output and possibly 2 fuses for the actual remote start. A relay may have failed as well, or a wire could have come loose.
-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
|