durango domelight relay

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76603
Printed Date: July 18, 2025 at 5:12 AM

Topic: durango domelight relay

Posted By: ridddler
Subject: durango domelight relay
Date Posted: April 22, 2006 at 7:14 AM

hey guys . wanted to check my wiring for the domelight supervision relay 881xp on 01 durango. not sure what to put to 87 pin.
85=blk/whie from unit
86=12v constant
30=domelight supervision wire. or in this case on this truck door triggers tan/tan red diode isolated?
87=?
any info would be great thanks

Replies:

Posted By: xscash
Date Posted: April 22, 2006 at 8:05 AM

you may be able to trip it with the blk/whie on your unit directly...no relay. its a ground. so if you use the relay...connect 87 to ground. and you only need to tap the tan wire to activate.

-------------
expandable sound
south of boston

Posted By: ridddler
Date Posted: April 22, 2006 at 8:14 AM

thanks man

Posted By: ridddler
Date Posted: April 26, 2006 at 3:57 PM

ok got the relay hooked up. i clicks when arm/disarm. no supervision. if i set off alalrm the relay is clicking like it should to flash the domelights, but the dont flash. any ideas? maybe i have to diode isolate this wire like i did for the door trigger

Print Page | Close Window