95 Mustang, Black Widow 4150

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76685
Printed Date: July 18, 2025 at 7:27 PM

Topic: 95 Mustang, Black Widow 4150

Posted By: longfellowdeeds
Subject: 95 Mustang, Black Widow 4150
Date Posted: April 23, 2006 at 5:45 PM

hi, i am installing a black widow 4150 (alarm+ keyless entry) in my 95 mustang, this car has power locks but no keyless entry!, i need someone to walk me through installing it, i have the wires connected but all i hear is the relay's in the brain clicking! PLEASE HELP!!!

Replies:

Posted By: mo12v
Date Posted: April 23, 2006 at 7:17 PM

If you are sure your Mustang came WITHOUT Factory Keyless, then you will need to do a 5 wire Reversal.
Does your Unit have ON-Board relays??

Find your LOCK & UNLOCK wires ( PINK / Yellow & PINK / Green ) Kick Panel
Cut them in Half.
One side of cut wires will have 12 Volts when you Press the DRIVER Door Switch. ( this will be called Switch Side )
One side of cut wires will show Nothing ( this will be called Motor Side )

5 Wire Reversal:

? = your Unit wires if you have ON-Board relays

Lock:

? = Switch Side ( N / C )
? = Motor Side ( COM )
? = 12 Volts Constant ( N / O )

Unlock:

? = Switch Side ( N / C )
? = Motor Side ( COM )
? = 12 Volts Constant ( N / O )

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: longfellowdeeds
Date Posted: April 23, 2006 at 7:47 PM

ok, that helps me out with the locks, but why won't the unit act properly? all i get is click noise from the brain.

Posted By: mo12v
Date Posted: April 23, 2006 at 8:38 PM

longfellowdeeds wrote:

ok, that helps me out with the locks, but why won't the unit act properly? all i get is click noise from the brain.

Not sure of your question??
Are you asking about the whole Alarm working "properly"? or the Door Locks??

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: longfellowdeeds
Date Posted: April 23, 2006 at 10:46 PM

the whole alarm, i have all the wires except the door locks connected, and all the alarm does is makes a click noise and the alarm goes non-stop. why would the the brain make the clicking noise non-stop and the alarm go off non stop??? what do you have to do to get these alarms to work ???

Posted By: mo12v
Date Posted: April 24, 2006 at 8:18 AM

If you are sure you have everything connected properly..........
Be sure the Alarm is NOT in Valet Mode.
Also, how long after Arming, does the Alarm Trigger??

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.