Aftermarket locks wiring, relays
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76700
Printed Date: June 09, 2024 at 10:51 AM
Topic: Aftermarket locks wiring, relays
Posted By: the96ex
Subject: Aftermarket locks wiring, relays
Date Posted: April 23, 2006 at 10:56 PM
I bought a (cheap) set of aftermarket power door lock actuators on eBay for my 91 Integra RS 2-door, because I plan on adding an alarm in the near future. Anyway, after installing these into the doors and running the wires to under the dash, I threw out the wiring diagram!
Let me explain how the wiring works for these locks (it's probably the same for most aftermarket lock actuators though). There is two wires coming out of the actuator. Apply power to them one way (ex. blue to (+), green to (-)), the locks will lock, and if you apply power to them another way (ex. green to (+), blue to (-)), the locks will unlock (I wired both actuators together so I just have one blue and one green wire for both doors now). I'm sure there is a name for this type but I don't know it.
Basically is this: https://www.the12volt.com/doorlocks/page3.asp#arp 
the right one for my application? After studying the diagram, it looks like it would work but I can't afford to blow up actuators and relays, etc. Thanks!
-------------
96 Accord EX Coupe 5-Speed
Replies:
Posted By: infinkc
Date Posted: April 23, 2006 at 11:06 PM
Posted By: the96ex
Date Posted: April 24, 2006 at 2:13 PM