Print Page | Close Window

Multiple LEDs off Alarm Brain

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76936
Printed Date: May 08, 2025 at 7:57 AM


Topic: Multiple LEDs off Alarm Brain

Posted By: resvr6
Subject: Multiple LEDs off Alarm Brain
Date Posted: April 28, 2006 at 5:36 AM

I want to use several LEDs in my alarm install, but I have been told that if I use too many I could fry that stage of my alarm brain...if this is the case, how can I change that?

is there a low voltage relay that will allow 12V through?

can anyone help me with this aspect of my install?




Replies:

Posted By: Powermyster
Date Posted: April 28, 2006 at 7:49 AM
how many do you wanna use.

spdt relays let 12 through. but the coil eats up alot more current that an led

you can run flashing led's off teh Ground when armed

-------------
Why oh Why didn't i take the blue pill
Darren Power




Posted By: KPierson
Date Posted: April 28, 2006 at 4:06 PM
You can use a transistor to amplify the current from the LED output, there are several threads on the12volt.com about this.

-------------
Kevin Pierson





Print Page | Close Window