Print Page | Close Window

hornet 563t, 1989 honda civic

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77439
Printed Date: July 07, 2025 at 5:07 AM


Topic: hornet 563t, 1989 honda civic

Posted By: elchapin
Subject: hornet 563t, 1989 honda civic
Date Posted: May 08, 2006 at 9:08 AM

I am installing this alarm into an 1989 honda civic 5 speed I had a question on 3 wires from the alarm to what I would connect them to?

first wire = remote start activation ( - )

second wire = igntion input to alarm ( + )

third wire = neutral safety switch inout ( - ) I think since my car is stick I will just ground this but I want to be sure.

Also do I need to add a starter kill to this alarm



-------------
ERH



Replies:

Posted By: dare_ds69
Date Posted: May 08, 2006 at 1:40 PM

first wire = remote start activation ( - )  you don't need it

second wire = igntion input to alarm ( + ) goes to ignition on the car BLACK / YELLOW

third wire = neutral safety switch inout ( - ) I think since my car is stick I will just ground this but I want to be sure. since you car is 5 speed conect it to the e-brake

and yes you have to do a starter kill

posted_image



-------------
how own your mind, control your life.
MECP certified. always use a DMM




Posted By: elchapin
Date Posted: May 08, 2006 at 4:01 PM
thanks I kind of thought that is what I needed to do but wanted to be sure.

-------------
ERH





Print Page | Close Window