Print Page | Close Window

Viper 1000 wiring with door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77444
Printed Date: July 06, 2025 at 1:12 PM


Topic: Viper 1000 wiring with door locks

Posted By: downsouthplaya
Subject: Viper 1000 wiring with door locks
Date Posted: May 08, 2006 at 11:01 AM

its been a while since I installed anything in a car (almost 5 years), and I decided to come out of retirement to install an alarm in my truck (viper 1000).

I have a 1990 Chevy 2500 that i'm adding doorlocks too (power nothing)

I have the doorlocks mounted and they work fine with a 10 volt battery that are a two wire system (blue and green) lock and unlock; so i take it they are positive trigger

Now here's where i'm stuck...

blue and green would go to those same color wires, now would the violet unlock normally opened and the unlock common BROWN / black go to 12v and the lock normally closed WHITE/ black and BLACK/ white to go ground? or vice versa?

any help will be appreciated




Replies:

Posted By: gregory863
Date Posted: May 08, 2006 at 12:16 PM
you need two relays. 87 12v 87a gets neg v 30 to dl's


Print Page | Close Window