Factory alarm problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77517
Printed Date: May 16, 2025 at 6:49 PM

Topic: Factory alarm problem

Posted By: baggedranger
Subject: Factory alarm problem
Date Posted: May 09, 2006 at 3:09 PM

I've got a Lexus RX300 1999, with the remote on top of the key. The problem is the factory alarm keeps going off after about 10 min. after it sets.... anyone have any suggestions?????

Replies:

Posted By: mo12v
Date Posted: May 09, 2006 at 3:46 PM

Have you got the Key Sense wire hooked up??
BLUE wire @ Ignition Switch Harness

Using the status output wire from the remote start to trigger this wire will disarm the factory alarm without unlocking the doors.

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: baggedranger
Date Posted: May 10, 2006 at 1:11 PM

I don't think you understand what I was saying, the alarm is a factory installed piece, I haven't installed anything to the system.... this is a customer of mine that got this Lexus from the auction and I'm trying to get the Factory alarm to work right....

Posted By: dea,can
Date Posted: May 11, 2006 at 10:44 AM

faulty unit ,or detects a open zone

-------------
dragon

Posted By: thepencil
Date Posted: May 11, 2006 at 4:17 PM

dea,can wrote:

faulty unit ,or detects a open zone

I take the first answer more. Open zone, maybe. If you can lock the doors. It looks more of a faulty unit.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Print Page | Close Window