2003 envoy ignition wires?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77518
Printed Date: May 16, 2025 at 12:12 PM

Topic: 2003 envoy ignition wires?

Posted By: maxcat
Subject: 2003 envoy ignition wires?
Date Posted: May 09, 2006 at 3:10 PM

Hey Guys, just picked up a 2003 gmc envoy, and was wondering how hard it is to get to the ignition wires. Have not had a chance to take a close look at the panels, but was planning on throwing a r/s into it. Can somebody give me some insight into the difficulty of the panel removal and which ones have to come off.

Thank-you in advance

Replies:

Posted By: xtremej
Date Posted: May 09, 2006 at 3:35 PM

The whole bootom panel comes off. Remoce the 2 7mm screws, giver a little tug and off it goes. Wires are all right in front of you, easy install.

-------------

Posted By: maxcat
Date Posted: May 09, 2006 at 4:39 PM

thanks for the reply extremej , I will give it a shot

Posted By: NowYaKnow
Date Posted: May 09, 2006 at 5:54 PM

Remove 2 7mm screws from the very bottom black panel. Remove 4 7mm screws from the knee panel. Remove 4 10mm bolts from the metal panel. Then there's your wires. Here's a link to help you with the wiring:

https://envoystuff.com/index.php?showtopic=3

- Mike

Print Page | Close Window