PARKING LIGHTS 96 JETTA

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7753
Printed Date: May 08, 2025 at 10:05 AM

Topic: PARKING LIGHTS 96 JETTA

Posted By: rghrdr18
Subject: PARKING LIGHTS 96 JETTA
Date Posted: January 06, 2003 at 5:12 PM

i am installing an alarm into a 96 jetta and was wondering if i need to put anything on the parking light wire from the alarm to hook up to the two wires on the car? also i was wondering if i needed to do the same witht the trunk release wire when i tap onto the trunk release switch? let me know asap. thanks

Replies:

Posted By: mxxmikexx
Date Posted: January 06, 2003 at 5:25 PM

You need to diode isolate the two parking light wires when hooking up your wire from your alarm. according to my techsoft it says you need to isolate the trunk release switch with a relay when hooking up your trunk pop wire. i dont see why you couldnt just isolate it with a diode though. hope this helps

Posted By: rghrdr18
Date Posted: January 06, 2003 at 5:45 PM

for the trunk release would i use a diode and just splice onto the trunk release wire?

Print Page | Close Window