Toad Ai606 Aux Output’s Failed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77610
Printed Date: July 15, 2025 at 8:51 PM

Topic: Toad Ai606 Aux Output’s Failed

Posted By: bobby-gg
Subject: Toad Ai606 Aux Output’s Failed
Date Posted: May 11, 2006 at 7:43 AM

I'm installing a Toad Ai606 on my Toyota Surf.

I choose this unit as it has 3 aux outputs, which will allow me to, 1, roll rear window up, 2, roll rear window down, and 3, switch on spotlights for nighttime enter to vehicle.

yesterday whilst installing, all 3 outputs were working on demand, but now none of them are working, and I cannot hear any relays operating inside the control unit.

Can you fry these outputs?

Can you replace the relay's if fried?

Rob.

Replies:

Posted By: bobby-gg
Date Posted: May 11, 2006 at 1:48 PM

I've sorted it!!

The old 'check your earth rule'

Print Page | Close Window