Print Page | Close Window

Toyota dealer installed start-inhibit

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7763
Printed Date: June 13, 2024 at 7:05 AM


Topic: Toyota dealer installed start-inhibit

Posted By: csorb
Subject: Toyota dealer installed start-inhibit
Date Posted: January 06, 2003 at 8:12 PM

Hi! I installed a remote-start/keyless into a 97 Avalon. A starter-kill and led was installed by a Toyota dealer. The led plate says Toyota on it. I would like to know if I can remotely interface this system with my newly installed piece. The normal factory arm and disarm wires don't work.    Thanx

Chaim



-------------
csorb



Replies:

Posted By: auex
Date Posted: January 06, 2003 at 8:58 PM
If it is a factory option then you should be able to use it.  If it is a Dealer installed aftermarket option then you prob wouldn't be able to integrate the two alarms.  If all you want to use is the LED then that is possible depending on whether or not the alarm output is the same as the led, some are 2V and some are 12V.  The dealer options are usually just an add on keyless entry alarm and the new alarm/rs would basically take over any functions that the dealer option would have.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.


Print Page | Close Window