Cliffnet Wizard Cable problem, intelliguard

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77776
Printed Date: May 19, 2024 at 11:56 AM

Topic: Cliffnet Wizard Cable problem, intelliguard

Posted By: dxdenis02
Subject: Cliffnet Wizard Cable problem, intelliguard
Date Posted: May 14, 2006 at 7:59 PM

i cant seem to get the wizard software to talk to my intelliguard 9000. i have an xp laptop with a serial port running wizard software rev 2.2. the cable i got is c126 which is just the cable, i didnt get the co14 adapter. now i had a gender changer sitting around to change the cables male to a female to plug it in to the computers serial port but i get "no system found". should be be using a null modem aka crossover instead of the gender changer. any help is greatly welcome

Replies:

Posted By: Powermyster
Date Posted: May 15, 2006 at 3:03 AM

I'll have to look at my cable i'm sure there is a dongle on it

-------------
Why oh Why didn't i take the blue pill
Darren Power

Posted By: dxdenis02
Date Posted: May 15, 2006 at 12:18 PM

so i made a db9 female to female null modem at work today will try it out and post result for archived information

Posted By: dxdenis02
Date Posted: May 16, 2006 at 12:05 PM

a null modem adapter is required between the pc's com port and the clifford wizard cable

Print Page | Close Window