clifford omnisensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77806
Printed Date: September 18, 2025 at 7:44 PM

Topic: clifford omnisensor

Posted By: dxdenis02
Subject: clifford omnisensor
Date Posted: May 15, 2006 at 9:59 AM

so the g4 omnisensor is no more dei has the g5. i would like to verify my idea. can i take a g5 omnisensor and hook it up to the g4 alarm simple by cutting the RED / black wire feeding it the 5v and rewire to feed 12 v and all should be good am i correct?

Replies:

Posted By: dxdenis02
Date Posted: May 15, 2006 at 12:24 PM

so you have to love dei tech support.... they told me the g5 omnisensor will not work with the g4 clifford and when i presented the idea for cutting the RED / black wire on the g4 alarm (which feeds the sensor 5v) and rewiring it to 12v to turn on the g5 omnisensor.... at first you would have thought i asked him to take a hit of a crack pipe and then said hold on and came back and said "it sounds like it would work" .... i think it will work because we are just turning the sensor on and not affection the digital info. i would just like some 3rd party verification before i invest the time to get on my back and rip the dash out.

Posted By: dxdenis02
Date Posted: May 16, 2006 at 12:03 PM

ok so we invested some time and here are the results to add a g5 omnisensor to a g4 alarm. just hook it up the g4 alarm omni sensor wies which should be RED / black black and WHITE/ blue and at the main plug all i did was cut the RED / bacl wir at pin 2 and tap it into the red wire pin 6. basically we are cutting the 5v and giving the sensor 12v and she works great.

live on g4 clifford