Wiring diagram for a Python System 80

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77808
Printed Date: May 19, 2024 at 3:48 PM

Topic: Wiring diagram for a Python System 80

Posted By: whosinfront
Subject: Wiring diagram for a Python System 80
Date Posted: May 15, 2006 at 10:28 AM

I'm looking for an installation diagram for a Python System 80 (also known as a Steal Stopper) car alarm .. cica 1992/3.

I pulled this unit from a 1988 Jeep (and I made a note of where most of the wires go), and now want to fit it in a 1980 El Camino .. my main reason is so I can interface to the power door locks. Does anyone have the full wiring idagram for this unit .. especially how to connect to power door locks (which I understand this unit does).

Thanks

Wif

Replies:

Posted By: dxdenis02
Date Posted: May 15, 2006 at 2:23 PM

dei has not changed their colors you can look at almost any dei alrm with on board relays and go from there

Posted By: whosinfront
Date Posted: May 15, 2006 at 2:43 PM

Thanks .. but I still need access to a wiring diagram of some sort. Are the internal relays man enough to handle older power door lock currents ??

Print Page | Close Window