altima 96 brake wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77925
Printed Date: May 11, 2025 at 5:57 PM

Topic: altima 96 brake wire

Posted By: marcopolo
Subject: altima 96 brake wire
Date Posted: May 17, 2006 at 1:16 PM

I just installed a remote starter onmy altima and im having a problem with the brake wire,ths wire reads 12 volts when the pedal is not activated when i press it,reads ground,the remote starter that i have is an autopage and it has only one input for the brake and this input activates when it reads 12 volts,so i have been trying diferent wires relationated with the brake lights but all of them switch from positive to negative,what can i do to correct this problem,

Replies:

Posted By: jlatinpr05
Date Posted: May 17, 2006 at 2:00 PM

You have the wrong wire then. RED / green at switch is +. Done over 50 altimas, never had a - break wire.

Print Page | Close Window