Ford Contour doorlock issues

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77996
Printed Date: May 12, 2025 at 2:01 PM

Topic: Ford Contour doorlock issues

Posted By: slammedniss
Subject: Ford Contour doorlock issues
Date Posted: May 18, 2006 at 8:00 PM

Installed an Ungo RK1 remote start/keyless this past winter. Don't remember the year of car, but it was a Ford Contour. Locks were either (-) or (+) pulse. Lately, when they unlock via the remote, or the interior switch, it immediately locks the doors again. I unplugged the lock molex from the unit, and then locks work fine. Plug it back in, does the same as before.

Faulty unit?

Replies:

Posted By: cntrylvr79
Date Posted: May 18, 2006 at 8:34 PM

TRy putting diodes on the lock wires from the unit. Helps sometimes

-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer

Posted By: slammedniss
Date Posted: May 21, 2006 at 6:25 PM

I swapped out the hardware, left all wiring intact, and it works fine now.

I have to say, this is probably the first DEI piece I've ever seen go bad in 13 years.

Print Page | Close Window