Clifford intelliguard 600 wiring?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77998
Printed Date: June 09, 2024 at 10:04 PM

Topic: Clifford intelliguard 600 wiring?

Posted By: pajss
Subject: Clifford intelliguard 600 wiring?
Date Posted: May 18, 2006 at 8:26 PM

Hi guys.

I picked up this old school alarm the other day (Clifford intelliguard 600} and I would like to get a wiring diagram for it. I searched the downloads section and all other areas that I could find here, but no luck. The circuit board says "10/93" so it's most likely from the '94' vintage ? If there is no wiring diagram out there does anyone know if Clifford has changed the basic color coding on the wires as another way to trace down what goes where. I have all the harnesses for it and all the stuff that it came with except the LED, so I can use that to trace some of it if needed but the diagram would sure help.

Thanks

Kary

Replies:

Posted By: mo12v
Date Posted: May 18, 2006 at 10:13 PM

Is that 600 not 6000?

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: pajss
Date Posted: May 18, 2006 at 11:31 PM

It is definetely a 600 model and I have the original box that it came it.

Any idea where I can find a diagram??

Thanks

Kary

Posted By: swamprat323
Date Posted: May 19, 2006 at 10:07 PM

i have the 700 that may help, only have the wire part not a full install guide.

Posted By: pajss
Date Posted: May 20, 2006 at 12:15 AM

Dose the 700 use 2 15 pin plugs on the brain? If so that would probably work.

Thanks

Kary