intellistart 4?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78014
Printed Date: May 19, 2024 at 1:17 PM

Topic: intellistart 4?

Posted By: dxdenis02
Subject: intellistart 4?
Date Posted: May 19, 2006 at 9:09 AM

i have read conflicting stores on how to hook up the blue/green wire when in manual mode(BLACK/ green left unconnected) the manual says "Find the one wire near the emergency brake that carries +12V when the emergency brake is engaged and 0V when it is disengaged. Connect the BLUE/GREEN wire to this wire...." to me this means this wire needs 12v for the unit to activate........BUT i have read other posts that say "yes, blue/green park brake wire must see ground in order to enter 'manual safe start'." https://www.carsound.com/forum/showthread.php?t=60608&page=2

so which is it can someone please clarify this

Replies:

Posted By: Evolution-UK
Date Posted: May 20, 2006 at 8:41 AM

For manual transmittion cars:

BLACK/ green: not connected
blue/green: handbrake/emergency brake. wire should show ground when the brake is engaged and 12v when released.

It must see ground to allow the car to start
It must see 12v+ to shut it down

Posted By: Powermyster
Date Posted: May 20, 2006 at 12:13 PM

evo said it all.

-------------
Why oh Why didn't i take the blue pill
Darren Power