prestige aps155 remote alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78028
Printed Date: June 11, 2024 at 3:29 PM
Topic: prestige aps155 remote alarm
Posted By: captinovias
Subject: prestige aps155 remote alarm
Date Posted: May 19, 2006 at 2:14 PM
how do i program the remote, because when i plug in the fuse the alarm goes crazy and when i press the buttons on the remote nothing happens, and the only way to stop the alarm is to take out the fuse again
Replies:
Posted By: Twelvoltz
Date Posted: May 19, 2006 at 4:36 PM
The installation manual, which includes remote programming options can be found in the downloads section of this site.
Posted By: Chris Luongo
Date Posted: May 20, 2006 at 12:45 AM
Also, you can simply put the alarm into valet mode to disable it-----unless there is a problem with the installation, there is no need to remove the fuse.
1. Turn ignition on.
2. Flip the toggle switch, probably mounted in the kick panel, to the "on" or "up" position.
Now, the red LED should be on solid, and the alarm is disabled.
To allow the alarm to work again, simply turn the ignition on, and move the switch off.
Posted By: misterjimbo
Date Posted: May 24, 2006 at 12:00 PM
to program the remote start with the over ride in the off position. key on switch on switch off switch on doodiech off switch on press the large black button on the remote. (you should hear the siren chirp) switch off switch on press small green button (you should hear a chirp) key off and you are all set -------------
Posted By: misterjimbo
Date Posted: May 24, 2006 at 12:04 PM
also before you try and program the remote you will have to over ride the alarm. start with the key off and the switch off. key on switch on key off switch off -------------
|