Hi Guys,
Apologies if this has been asked before,ive done a search but cant find my answer.
I installed a clifford intelligaurd 750 into my Uk spec 99 honda civic Hatch today.All is fine apart from the central door locking which is not working off the alarm keyfob.Afaik the C/L worked off the the standard honda infra red fob but i didnt get this with the car when i bought it.
Is it a case of i need a seperate motor or relay or should the alarm be opening the doors already?I was under the assumption only JDM honda's and not euro spec ones needed these
Thanks in advance
E
99 Civic
How did you interface the door locks? Trusting the UK version is the same as the US (DEI does not list a different one for the UK in 99) the spec sheet states they are negative trigger located at the keyless entry module " The keyless entry module is white in color, and located in the drivers kick panel.". GREEN / WHITE for lock and GREEN/ Orange for unlock. With the Clifford Intelliguard 750 you just have to connect the Green Lock output to the GREEN / WHITE Honda wire and the Blue unlock output to the GREEN/ Orange Honda wire.
Hope this helps.
Thanks for the replay twelvevolts,
Im new to installations so i followed the factory wiring diagram (haynes manual) to the central locking unit,the colour wires coming from it are GREEN/ red,WHITE/ blue,black,WHITE/ red,blue/white,blue/red so im hazarding a guess its different wiring to the us spec.
It was reccomended to me that i may need another motor as when i turn the key in the passenger side door it doesnt unlock the driver side,yet turning the key in the driver side unlocks the passenger side.
This may help you abit more,its the specific wiring diagram for my car.
3:interior fusebox
28:central locking unit
30: drivers side door lock
31 passenger door lock
32 (4 door rear lock)
33 (4 door rear lock)
Here's a picture i snapped of the c/l unit
There's a 96 uk civic on the design tech page which states the power lock/unlock is a GREEN/ red with silver rings which is what ive got in the picture above.Is it a case of joining the blue and green wires from the clifford and adding them both to this?