Print Page | Close Window

Viper 160 xv

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78154
Printed Date: May 13, 2025 at 7:55 AM


Topic: Viper 160 xv

Posted By: rvd13
Subject: Viper 160 xv
Date Posted: May 22, 2006 at 8:28 PM

I had a Viper 160 xv installed on my 2004 Toyota Tundra. I had to carry it back to my local installer two weeks after they installed it because the locks would not lock. It took them a while but they finally got it to work. After about 6 months it has started having intermediate problems. The locks will unlock but will not always lock. It quit working this weekend and I carried it back to installer. It started working when I carried it to them so they could find nothing wrong. They asked me to bring it in when it isn't working. Since this weekend it works about half the time. Everything but the door locks works great. The horn sounds so it is receiving the signal, but the doors will not lock. Does anyone have any suggestions.

Thanks for any help




Replies:

Posted By: captainzab
Date Posted: May 22, 2006 at 10:58 PM
well, the lock wires are in th door, and he had to use diodes, im pretty sure the diodes or wires are loose. i had same problem with my 4runner. take it back and tell them to re-solder or crimp the diode again
hope that helps


Print Page | Close Window