CA425/CA545 Still won’t start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78157
Printed Date: May 13, 2025 at 12:57 AM

Topic: CA425/CA545 Still won’t start

Posted By: trieck1232
Subject: CA425/CA545 Still won’t start
Date Posted: May 22, 2006 at 9:13 PM

1995 Subaru SVX L

I have the alarm all installed everything works great locks trunk shock sensor EXCEPT it wont start the car, it has learned the tach and everything...all I get is either 4 or 5 chirps out of it...whats the deal!!! the only wire im wondering about is the blue/white its for remote start activate or somthing, where is it supposed to go?

-------------
---Travs---

Replies:

Posted By: Chris Luongo
Date Posted: May 22, 2006 at 11:09 PM

That indicates one of the following......

-Brake pedal is on, or brake input is miswired

-Hood is raised, hoodswitch improperly installed, or hood input miswired

-Control switch is on the "off" position, unplugged, plugged into the wrong port, or broken

First check out the control switch, and if that's not it, go DIRECTLY to the alarm brain, and test the hood and brake wires for proper function.

Print Page | Close Window